中文

Why WenYaJi says “a bit high”, not “hypertension”.

2026-11-22 · WenYaJi

Finish a measurement and the screen offers a word. Some people hope it will be “normal”. Most are afraid of the other one: hypertension.

WenYaJi never says that word. It says low, normal, high-normal, elevated, clearly high, very high — six neutral bands. That is not timidity about wording. It is the app being honest about where its authority ends: it is here to put the numbers you measured in order, not to diagnose you.

What follows: how a reading gets in, how it turns into a trend, and how it ends up on a sheet of paper for your doctor.

Three ways in, three real situations

Typing it in is the baseline: three large fields for systolic, diastolic and pulse. If you can type, it is the fastest way.

The camera is for the parents who cannot. Take the measurement, point the phone at the monitor's display, and the three numbers fill themselves in — a good deal more realistic than teaching a seventy-year-old to tap twelve times on a keypad.

Saying it out loud is for the moment when the cuff is still on your arm. Hold the button, say “125 over 88, pulse 85”, let go, done.

All three routes end on the same confirmation screen. Every number can be edited, and nothing is saved until you confirm. No reading is ever recorded silently.

Reading the display: why no big model here

A blood pressure monitor has a seven-segment display. That matters more than it sounds: every digit is a fixed set of seven strokes switched on and off. No handwriting to interpret, no font variation.

So the pipeline goes like this:

There is no neural network anywhere in it. The practical benefits are real: nothing to download, nothing to update, nothing that gets dumber on a different phone, and every step can be explained. On a seven-segment display a 7 and a 1 differ by two strokes; counting strokes beats asking a black box to guess.

The digits then have to pass a semantic check: displays usually print SYS / DIA / PUL or words to that effect, and the app matches each label to its line; when the labels are missing it falls back to position, and it enforces systolic above diastolic, both inside a plausible range. A line it cannot read confidently is discarded, not guessed. The photo lives in memory for the duration of the read and is never saved or uploaded.

Saying it out loud means understanding Chinese numerals

Voice entry uses the system's recogniser with on-device recognition forced: no network, no recording, no upload. If the device has not downloaded the offline speech pack for that language, the entry point is hidden rather than quietly switched to a server — a privacy promise cannot be discounted on the assumption that nobody will notice.

The genuinely hard part is spoken Chinese numbers. “125”, “one hundred twenty-five”, “one two five”, “yāo èr wǔ” all have to be understood; “yī bǎi èr” means 120, not 102; “yī bǎi líng wǔ” is 105; “shí bā” is 18. A small hand-written parser handles these forms, and anything it cannot parse is treated as not heard.

Likewise, a missing label means failure rather than a guess: if you said only two numbers and neither “systolic” nor “diastolic” appeared, the app will not helpfully pair them up in order — it asks you to say it again. And “diastolic 88, weight 70” is not read as a pulse of 70.

Six bands, and one line that cannot be crossed

The bands follow the usual adult ranges, taking whichever of systolic and diastolic sits in the higher band:

Why not just call these “hypertension”? Because a diagnosis needs more than one reading: repeated measurements on different days, ruling out white-coat effect, checking for target-organ damage. None of that is within a phone app's reach. Writing “hypertension” on the screen would borrow the doctor's conclusion without carrying the doctor's responsibility.

But one line is hard: at systolic 180 and diastolic 120, the app interrupts whatever advice it was about to give and shows only two things — measure again, and seek medical care immediately (call emergency services if needed). That is the single place where the user is not left to judge for themselves.

How one reading becomes a trend

The easiest way to lie with trends is to average every reading of the day together. Someone measures once in the morning and three times in the evening; that day now counts four times.

WenYaJi averages by day first, and charts the daily averages — one point per day, so nobody can pull the curve down by measuring more often.

Mornings and evenings are kept apart: 4:00–12:00 counts as morning, 17:00–24:00 as evening, each averaged and compared on its own. That is far more useful than one blended number, because morning and evening were never the same number to begin with.

As for “better or worse than before”, the app does one very restrained thing: it splits the window in half by time and compares the mean systolic pressure of the later half with the earlier one. And it only says “rising” or “falling” with at least 6 readings, spanning at least 3 days, and a change of at least 3 mmHg. With too little data it says nothing — silence is better than a conclusion drawn from two readings.

The A4 report: typeset, not screenshotted

At a follow-up appointment, the doctor does not have time for your camera roll. So before the visit you can export an A4 PDF: overview, control rate, morning and evening means, pulse pressure, trend chart, every reading, medication and adherence.

The PDF is drawn as vectors, not assembled from screenshots: 595 × 842 points for A4, 40-point margins, text, rules and the two-line trend chart all vector, so it prints sharply. The chart carries dashed references at 135 / 85, and beyond 40 entries it switches to daily averages automatically rather than handing the doctor a fifteen-page table.

The window is 7, 14 or 30 days, today included, first day included. The control rate is the share of readings where both systolic and diastolic are under the target you set; adherence counts only doses that were already due when the report was generated — medicine you have not taken yet is not a missed dose.

Deliberately not done

No drug names, no doses. Adjusting medication is the doctor's job; the moment an app suggests “add half a tablet”, it has stepped over the line.

No cloud sync. Records live on this device, and each family profile is separate; the widget reads a local snapshot file. With no account there is no forgotten password, and no question about whose server the data sits on.

No notification permission up front. The system prompt appears only when you actually create your first measurement or medication reminder. An app that is not yet planning to remind you has no business asking.

The only network communication is Apple's in-app purchase. No ads, no third-party analytics, no crash reporting.

See WenYaJi

App Store: id6826959003 · iPhone / iPad, iOS 18 or later · Free download, Pro comes with a free 7-day trial, then a one-time purchase
For keeping records and lifestyle only: not a medical device, and it does not diagnose.

Keep reading

Products: Sealion Seacat Seaflower Seaspider Seasnipe Seastar Seadog Jiong WBXL Xultray webapp
Blink templateJS skiafy tranid Yimaji WenYaJi DanceDouble Pure Pace mkok i.zhuatang 原创歌曲
(C) 2026 ZHUATANG.COM, All rights reserved
This site counts visits with Google Analytics and a small first-party log (IP address, page and referrer, no cookies), only to improve these pages; the apps themselves ship no analytics SDK whatsoever.
媒体素材 / Press Kit · Blog

update: 2026-11-22